Page 22
Functional Principle, Technical Data
optoNCDT 2300
Model ILD 2310- 10 20 40 50
Measuring range
1
mm
(inches)
10 / 5
(.39 / .20)
20 / 10
(.79 / .39)
40 / 20
(1.57 / .79)
50 / 25
(1.97 / .98)
Start of measuring range
1
mm
(inches)
95 / 100
(3.74 / 3.94)
90 / 100
(3.54 / 3.94)
175 / 195
(6.89 / 7.68)
550 / 575
(21.7 / 22.6)
Midrange
1
mm
(inches)
100 / 102.5
(3.94 / 4.04)
100 / 105
(3.94 / 4.13)
195 / 205
(7.68 / 8.1)
575 / 587.5
(22.6 / 23.1)
End of measuring range
1
mm
(inches)
105 / 105
(4.13 / 4.13)
110 / 110
(4.33 / 4.33)
215 / 215
(8.46 / 8.46)
600 / 600
(23.6 / 23.6)
Measuring rate
7 adjustable stages: 49.14 kHz
2
/ 30 kHz / 20 kHz / 10 kHz / 5 kHz / 2. kHz / 1.5 kHz
Linearity
µm < ± 3 < ± 6 < ± 12 < ± 50
% FSO < ± 0.03 < ± 0.1
Resolution µm 0.5
1
3
2 7.5
Spot diameter
SMR 400 x 500 200 230 400 ... 500
MMR 400 x 500 60 210 400 ... 500
EMR 400 x 500 200 230 400 ... 500
Light source Semiconductor laser < 1 mW, 670 nm (red); Class 2 acc. to IEC 60825-1: 2014 / optional class 3R
Permissable ambient light 10,000…40,000 lx
Power supply 24 VDC (11 ... 30 V); < 3 W (24 V)
Digital interface
RS422 (16 bit) / Ethernet / EtherCAT / PROFINET
4
/ EtherNet/IP
4
Analog output
4
4 … 20 mA / 0 … 5 V / 0 … 10 V / ± 5 V / ± 10 V
Temperature range Operation: 0 ... +50 °C (+32 °F up to +122 °F); storage: -20 ... +70 °C; (non-condensing)
Shock (DIN EN 60068-2-29) 15 g / 6 ms in 3 axis
Vibration (DIN EN 60068-2-6) 2 g / 20 … 500 Hz
Protection class (DIN EN 60529) IP65
Housing size, material M, aluminum L, aluminum
Weight approx. 550 g (incl. pigtail)
FSO = Full Scale Output, SMR = Start of measuring range, MMR = Mid of measuring range, EMR = End of measuring range; The specified data ap-
ply to white, diffuse reflecting surfaces (Micro-Epsilon reference ceramic for ILD sensors)
1) Second value is valid for a measuring rate of 49.14 kHz 3) Measuring rate of 10 kHz, without averaging
2) Measuring rate of 49.14 kHz with reduced measuring range 4) Connection via interface module (see accessories)
To Next Page
Loading...
