MICRO-EPSILON optoNCDT 2300 - Page 23

Page 23
Functional Principle, Technical Data
optoNCDT 2300
Model ILD2300- 2BL 5BL 10BL ILD 2310-50BL
Measuring range
1
mm
(inches)
2 / 2
(.08 / .08)
5 / 2
(.20 / .08)
10 / 5
(.39 / .20)
50 / 25
(1.97 / .99)
Start of measuring range
1
mm
(inches)
24 / 24
(.94 / .94)
24 / 24
(.94 / .94)
30 / 35
(1.18 / 1.38)
550 / 575
(21.65 / 22.64)
Midrange
1
mm
(inches)
25 / 25
(.98 / .98)
26.5 / 25
(1.04 / .98)
35 / 37.5
(1.38 / 1.48)
575 / 587.5
(22.64 / 23.13)
End of measuring range
1
mm
(inches)
26 / 26
(1.02 / 1.02)
29 / 26
(1.14 / 1.02)
40 / 40
(1.57 / 1.57)
600 / 600
(23.62 / 23.62)
Measuring rate
7 adjustable stages: 49.14 kHz
2
/ 30 kHz / 20 kHz / 10 kHz / 5 kHz / 2. kHz / 1.5 kHz
Linearity
µm < ± 0.6 < ± 1.5 < ± 2.0 < ± 40
% FSO < ± 0.03 < ± 0.02 < ± 0.08
Resolution
3
µm 0.03 0.08 0.15 7.5
Light spot diameter
(±10 %)
SMR, µm 70 x 80 200 x 200 75 x 85
400 ... 500MR, µm 20 x 20 20 x 20 32 x 45
EMR, µm 80 x 100 200 x 400 110 x 160
Light source Semiconductor laser < 1 mW, 405 nm (blue violet); Class 2 acc. to IEC 60825-1: 2014
Permissible ambient light 10,000…40,000 lx
Power supply 24 VDC (11 ... 30 V); < 3 W (24 V)
Digital interface
RS422 (16 bit) / Ethernet / EtherCAT / PROFINET
4
/ EtherNet/IP
4
Analog output
4
4 … 20 mA / 0 … 5 V / 0 … 10 V / ± 5 V / ± 10 V
Temperature range Operation: 0 ... +50 °C (+32 °F up to +122 °F); storage: -20 ... +70 °C; (non-condensing)
Shock (DIN EN 60068-2-29) 15 g / 6 ms in 3 axis
Vibration (DIN EN 60068-2-6) 2 g / 20 … 500 Hz
Protection class (DIN EN 60529) IP65
Housing size, material S, die-cast zinc L, die-cast zinc
Weight approx. 550 g (incl. pigtail) 800 g (incl. pigtail)
FSO = Full Scale Output, SMR = Start of measuring range, MMR = Mid of measuring range, EMR = End of measuring range; The specified data ap-
ply to white, diffuse reflecting surfaces (Micro-Epsilon reference ceramic for ILD sensors)
1) Second value is valid for a measuring rate of 49.14 kHz 3) Measuring rate of 20 kHz, without averaging
2) Measuring rate of 49.14 kHz with reduced measuring range 4) Connection via interface module (see accessories)