MIMAKI CFL-605RT - Set the Network

3-34
Set the network
You can also perform network setting with “Network Configurator”, the tool to perform network setting of
Mimaki’s product. To download the Network Configurator, check " Driver / Utility" on the download page at
Mimaki Engineering (http://eng.mimaki.co.jp/download/).
1
Select [INTERFACE] of the set up menu.
(1) Press the key in LOCAL.
(2) Press to select [SET UP] and press the key.
(3) Press to select [INTERFACE].
(4) Press the key.
2
Press the jog key or to select
[NETWORK].
3
Press the key.
4
Press the key.
• The IP address currently used by this machine is displayed.
5
Press the key.
6
Press the jog key or to select [MAC
Address] .
7
Press the key.
• The MAC address currently used by this machine is displayed.
• When you press , the remaining address is displayed.
8
Press the key.
• After connecting with the network, it takes time until the IP address is determined.
If the IP address has not been determined, “0.0.0.0” is displayed.
FUNCTION
<INTER FACE>


NETWORK [ ENT ]
<NETWORK> i n f o .


IP Addresss [ENT]
IP Address nfo.
0. 0. 0. 0
<NETWORK> i n f o .


IP Addresss [ENT]
<NETWORK> i n f o .


MAC A d d r e s s [ EN T ]
MAC A d d r e i n f o .
fe:aa : 00 >
<NETWORK> i n f o .


MAC A d d r e s s [ EN T ]