2-9
1
2
Basic Operations
5
5
6
Fixing the Workpiece
Method of fixing the sponge
When cut the soft material such as a sponge that can not be adsorbed and fixed, use a adsorption sheet to fix
the work in the following ways.
1
Put the workpiece on the cutting panel.
2
Set a roll of adsorption sheet to roll holder
3
Pull out the adsorption sheet and cover the
entire work surface
4
Press .
• In the case of nonporous work, please cut
the adsorption sheet on the work.
If you do not cut, adsorption sheet float and
jam occurs.
To Next Page
