5-4
Cleaning the Vacuum Filter
The workpiece adhesion force will decrease if the filter becomes blocked in the vacuum.
Clean the filter periodically (about once a month).
1
Remove the lid.
• Disengage the hooks and remove the lid.
2
Remove the filter.
3
Use a vaccum cleaner to suck dust and dirt from the filter.
4
Put the filter back in its original position.
(1) Push in the filter and firmly close the lid.
• The hooks will not engage unless the lid is firmly closed.
(2) Engage the hooks.
• When clean the filter, please wear gloves. Handling the filter with bare hands may cause injury.
To Next Page
Loading...
