6-23
1
1
1
1
Troubleshooting
6
CFL-605RT Specifications
Type
SPECIFICATIONS
CFL-605RT
Effective plotting width
X axis 610 mm
Y axis 510 mm
Maximum set work size
X axis 660 mm
Y axis 555 mm
Driving method X, Y, Z, θ axis: ,DC servo motor
Maximum speed
XY: 423mm / sec (45º direction)
(Maximum cut set speed: 300mm / sec)
*1
*1. I depends on the media.
Mechanical resolution
X axis : 4.3μm Y axis : 3.7 μm
axis : 0.0225° Z axis : 7.5 μm
Command resolution 0.025 mm / 0.010 mm (switchable on operation panel)
Maximum cutting pressure
Swivel cutter: 1,000g
tial cutter / Crease: 1,500g
Static
accuracy
*2
*2. This is the accuracy for pen writing with almost no load. The guaranteed temperature range is 20 to 25°C.
Repeat accuracy Less than ± 0.2 mm (media expansion and contraction are excluded)
Range accuracy ± 0.1 mm or ± 0.2% of travel distance, whichever is largest
Origin reproducibility ± 0.10mm
Perpendicular
accuracy
Less than 0.2 / 430 mm
Work securing method Vacuum suction by vacuum unit
Maximum cut work thickness
tial cutter : 2 mm
Reciprocating cutter : 10 mm
Maximum set work thickness
tial cutter : 2 mm
Reciprocating cutter : 10 mm
Settable work weight 10 kg max. (No point load)
Receiving buffer capacity 27 MB (17MB at sorting)
Command MGL-IIC3
Interface USB / RS-232C / Ethernet
Operating
environment
Usage environment 5 - 35 °C 35 - 75 % (Rh), no condensation
Accuracy guarantee
range
12 - 25 °C 45 - 65 % (Rh), no condensation
Safety Standard
VCCI-classA, CE Marking
,
CB Certificate,US safety standards, UL 60950-1
RoHS , REACH,
FCC Part 15-ClassA
External
dimensions
Width 1,320 mm
Depth 1,045 mm
Height 1,100 mm
Cutting panel surface
height
Approx. 779mm
Weigh Less than 109kg(including vacuum)
Power supply Single phase AC100 - 120V / 200 - 240 V, 50 / 60 Hz, 500 W or less
To Next Page
