5-3
1
1
1
1
5
Daily Maintenance
Daily Maintenance
Unit B
The reciprocating shaft may cease moving if
lubrication is inadequate.
Before the work of the day, apply the grease to
vibration axis.
+
1
Draw the vibration axis.
2
Wipe off the old grease adhering to the axis in
the lint-free cloth
3
Apply grease to the vibration axis with the
included brush.
• This work is done in the state of
power supply OFF.
• Keep the tool removed.
Tools necessary to
lubrication
• Grease coating brush (Accessories) • Waste
• Grease (Accessories) • Gloves
• Amount of grease to be applied is about 0.05g.
• If the application quantity of grease is too much or adheres to other than the oscillation axis, may
cause splatters while working and risk of contaminating the work. Please wipe off the extra grease.
To Next Page
Loading...
