MIMAKI CFL-605RT - Vacuum Automatic OFF Function

1-25
1
Setup
5
6
6
Setting the Vacuum
Sets the vacuum operation when the vacuum is used.
Enabling / Disabling the Vacuum Automatic OFF Function
1
Select [PLOT SETTING] of the set up menu.
(1) Press the key in LOCAL.
(2) Press to select [SET UP] and press the key.
(3) Press to select [PLOT SETTING].
(4) Press the key.
2
Press the jog key or to select [AFTER
PLOT], and ress the key.
3
Press the jog key or to select [VACUUM],
and ress the key.
4
Press the jog key or to select setting.
• Set values: N/C , AUTO OFF
5
Press the key.
• Press if you do not want to save the setting.
6
Press the key twice for terminating this function.
Item Set value
AUTO OFF
*1
*1. The vacuum cannot turn off automatically if automatic head retraction is OFF.
If automatic head retraction is set to available, the vacuum turns off automatically
after head retraction.
N/C
Vacuum remains on after head retraction.
• If replace the sheet during continuous cut of register mark, it automatically turns off the vacuum
regardless the setting of the head automatic retraction.
FUNCTION
<AFTER PLOT>


AUTO V I EW: OFF
<AFTER PLOT>
VACUUM : N / C
<AFTER PLOT>
VACUUM : AUTO OFF