3-16
Setting the Cutter Stroke
This setting shortens the distance that the tool rises when cutting (or drawing) data with frequent up/down
movements of the tial cutter or grid roller. It thereby reduces the total cutting time.
1
Select [PLOT SETTING] of the set up menu.
(1) Press the key in LOCAL.
(2) Press to select [SET UP] and press the key.
(3) Press to select [PLOT SETTING].
(4) Press the key.
2
Press the jog key or to select [Z
STROKE], and ress the key.
3
Press the jog key or to select setting
value.
• Set values: 4 to 10 mm, FULLUP
4
Press the key.
• Press if you do not want to save the setting.
5
Press the key twice for terminating this function.
<PLOT SETT I NG>
ZSTROKE :7mm
<PLOT SETT I NG>
ROTA T I ON : ON
To Next Page
Loading...
