MIMAKI CFL-605RT - Procedure for Setting Register Mark Detection

4-9
Setting Register Mark Detection
1
1
1
4
Register Mark Reading Functions
Setting Register Mark Detection
1
Press the key in the local mode.
2
Press the jog key or to select [SET UP] .
3
Press the key.
4
Press the jog key to select [MARL
DETECT] .
5
Press the key.
6
Press the jog key or to select [Number of
detected registration marks].
• Set values: OFF, 1pt, 2pt-X, 2pt-Y, 3pt, and 4pt
7
Press the key.
8
Press the jog key or to select the following
items.
• The following items are provided for the setting of registration mark detection:
SCALE, SIZE, OFFSET-X, OFFSET-Y, FORM, COPIES X, COPIES Y, DETECT MODE, SENSOR
LEVEL, MARK FILLUP and Backside Data Cut
• See pages P.4-7 through P.4-8 for the contents of each setting item.
9
Press the key.
10
Press the jog key or to select the set values.
• See pages P.4-7 through P.4-8 for the contents of each setting item.
11
Press the key to confirm the value.
12
When you want to terminate this procedure, press the key twice.
<FUNCT ION>


SET UP [ ENT ]
FUNCTION
<FUNCT ION>


SET UP [ ENT ]
<SET UP >


PLOT SETT ING [ ENT ]
<FUNCT ION>


MARK DETECT [ ENT ]
<FUNCT ION>
MARK DETECT [ ENT ]
<MARK DETECT>
DETECT : OFF
<MARK DETECT>


DETECT : 2 p t - X