MIMAKI CFL-605RT - Basic Operation Workflow

2-2
Basic Operation Workflow
This section describes the basic operation workflow.
For details, see the reference page shown.
1
Turning the power on
See “Turning the power on” (P.2-8)
2
Moving the Head
See "Moving the Head"( P.2-4).
3
Fixing the Workpiece
See "Fixing the Workpiece"( P.2-6).
4
Setting the tool
conditions
See “Selecting Tools”( P.2-10).
5
Select the tool
condition
See Select the tool condition( P.2-10).
6
Making a Test Cut
See "Making a Test Cut"( P.2-17).
7
Setting the Drawing
Origin
See "Setting the Drawing Origin"( P.2-23).
8
Cutting (Drawing)
See "Cutting (Drawing)"( P.2-24).
9
Turning the power off
See “Turning the power on” (P.2-8)