1-3
1
Setup
5
6
5
6
Installation
Moving This Machine
Move this machine according to the following steps when this machine needs to be moved on the same step-
free floor.
1
Raise the adjuster foot, thereby grounding the
caster
2
Release the lock of caster.
3
Move this machine as shown in the figure.
• Move the machine by pressing mark at the machine side
cover.
• If you move by pressing the location other than mark, the
cover may be broken.
4
Lock the caster.
5
Lower the adjuster foot to perform a leveling of the
machine
• When the machine is moved to any place other than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may occur.
Be sure to request your distributor or our service office to move this machine.
• When moving this machine, take care that it does not receive a significant impact.
• Be sure to lock the caster after moving of this machine.
To Next Page
Loading...
