Minebea CSD-912B - Trouble Causes and Corrective Measures

270
Troubleshooting
11
11.1. Trouble causes and corrective measures
11.1. Trouble causes and corrective measures
If the following operation abnormalities occur during operating CSD-912B, refer to this
section to take corrective measures.
If your problem is not covered or persists even after taking the measures, contact us.
Item Trouble description Described in
LED/screen display Describes corrective measures to be taken
against troubles related to the screen
display or touch panel operation of CSD-
912B.
11.1.1.
Weighing operation Describes corrective measures to be taken
against troubles related to CSD-912B
operation during weighing.
11.1.2.
Standard RS-485 interface Describes corrective measures to be taken
against troubles related to standard RS-
485 interface communication.
11.1.3.
2-wires method serial interface
(serial interface)
Describes corrective measures to be taken
against troubles related to the 2-wires
method serial interface (serial interface)
communication and print operation.
11.1.4.
External control I/O Describes corrective measures to be taken
against troubles related to the
communication and operation of the
external control I/O.
11.1.5.
Analog output Describes corrective measures to be taken
against troubles related to the analog
output.
11.1.6.
BCD output Describes corrective measures to be taken
against troubles related to the
communication and output of the BCD
output.
11.1.7.
RS-232C interface Describes corrective measures to be taken
against troubles related to the
communication of the optional RS-232C
interface.
11.1.8.
RS-422 interface Describes corrective measures to be taken
against troubles related to the
communication of the optional RS-422
interface.
11.1.9.
RS-485 interface Describes corrective measures to be taken
against troubles related to the
communication of the optional RS-485
interface.
11.1.10.