3.2. How to read the display
16
Basic operations
3
(5) [F] key
Switch the displays of the keys (12) to (17) between the function key. Refer to “7.3.
Settings related to function keys” for more information about the function key setting.
(6) CZ display
Display [CZ] when the load value display is zero and the load value is within ±1/4 of the
minimum scale value. Indicate that the present load value is CZ ([CENTER OF ZERO]).
(7) [UNIT] display
Display the currently set unit. Refer to “7.1.4. Unit setting” for more information about the
setting of units.
(8) [GROSS]/[NET] key
Switch [GROSS] between [NET] of the load value display. Tapping [GROSS] displays
gross weights. Tapping [NET] displays net weights.
(9) [TARE] key
Perform [TARE]. Refer to “5.10.2. Tare weight cancellation” for more information.
(10) Display of [BRAND] information
Display the number, [NAME], [ACCUM. VALUE], and [ACCUM. TIMES] of the currently
selected [BRAND]. Refer to “5.2.3. Brand settings” for more information about brands.
(11) Display of weighing states
The display contents change according to weighing states.
[F. FLOW]: Lighted in case of [F. FLOW].
[M. FLOW]: Lighted in case of [M. FLOW].
[D. FLOW]: Lighted in case of [D. FLOW].
[OVER]: Lighted if [NET] exceeds the value of “[FINAL]+[OVER]” of [BRAND
CODE].
[OK] /LJKWHGLQFDVHRI³>),1$/@>81'(5@>1(7@>),1$/@>29(5@´
[UNDER]: Lighted if the net weight falls below the value of “[FINAL]-[UNDER]” of
[BRAND CODE].
[FULL]: Lighted if [GROSS] or [NET] exceeds the value of [FULL] of [BRAND
CODE].
[ZERO BAND]: Lighted if [GROSS] or [NET] falls below the value of [ZERO BAND] of
[BRAND CODE].
[FINISH]: Lighted when measurement is completed.
[FLOW]/[DISCH.]:
Display [FLOW] while the measured object is fed to the weighing
hopper. Display [DISH. ] while the measured object is discharged from
the hopper.
[S-COMP. ]/[SEQ. ]/ [MEAS. ]/ [4-COMP. ]/[RECIPE]:
Indicate the present [WEIGHING MODE]. [S-COMP. ]: In case of
[SIMPLE COMPARATIVE]. [SEQ. ]: Not making a measurement in
[SEQUENTIAL MODE]. [MEAS. ]: Making a measurement in
[SEQUENTIAL MODE]. [4-COMP. ]: In case of [4 STEP
COMPARATOR]. [RECIPE]: Recipe in [SEQUENTIAL MODE]
To Next Page
Loading...
