What to do if there is a battery fault with a flashing symbol and audible alarm on Mirion Technologies MiniSentry-2 Monitor?
If you encounter a battery fault accompanied by a flashing symbol and an audible alarm on your Mirion Technologies Monitor, replace the internal battery. Ensure that you use only the recommended replacement battery.
How to troubleshoot a Mirion Technologies Monitor Minisentry-2 that does not start?
If your Mirion Technologies Monitor (Minisentry-2) does not start, connect the mains cable, USB, or the 12 VDC power supply, depending on the available options.
What to do if the external battery is blinking on my Mirion Technologies MiniSentry-2 Monitor?
If the external battery indicator is blinking on your Mirion Technologies Monitor, try charging the external battery. If the issue persists, replace the external battery.
What to do if 2 Frisker LEDs are flashing purple on Mirion Technologies MiniSentry-2 Monitor?
If you observe two Frisker LEDs flashing purple on your Mirion Technologies Monitor, replace the probe cable. If the problem continues, replace the probe itself.
How to fix difficulty erasing LOG files on Mirion Technologies MiniSentry-2?
To address difficulty erasing LOG files on your Mirion Technologies Monitor, format the RAM.
General| Energy Range (Gamma) | 50 keV to 3 MeV |
|---|---|
| Alarm Types | Audible and visual |
| Display | LCD |
| Operating Temperature | -20°C to 50°C |
| Detector Type | Geiger-Mueller tube |
| Detection Capability | Gamma and Neutron Radiation |
| Dose Rate Range | 0.1 µSv/h to 100 mSv/h |
| Sensitivity | 0.1 µSv/h for gamma |
| Alarm Thresholds | User settable |
| Power Supply | Rechargeable battery |
| Power | Rechargeable battery |
| Humidity Range | Up to 95% non-condensing |
To Next Page
