USER MANUAL
MINISENTRY-2
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S., BP249, ZI de Vauzelles, 37602
2. Click on « OK » button, the Portal probes are in a « Calibrate » state with the current date:
14 LOG FILES
14.1 LOG FILE FORMAT
The MiniSentry-2 allow storage more than 100 days of data at the rate of one point per minute. In case
of full memory, the first records are erased.
Overrun and overflow alarms and alerts are time stamped by the second.
A separate, dated file is recorded on demand for each measurement mode.
A file is also saved automatically for each event (Alarms, Alert) and the current measurement.
The file names are generated automatically with the default prefix « MS2 ». Only the prefix is editable,
up to 10 characters, when the MiniSentry-2 is connected in USB mode to a computer (See 12.1).
The log files are stored in a « LOG » directory containing 4 subdirectories:
– WALK_THROUGH:
• « MS2_WALKTHROUGH_0001_2019-08-22_1.csv » for on-demand recording of the
Walk Through mode.
– ENTER_WAIT:
• « MS2_ENTERWAIT_0001_2019-07-23_1.csv » for on-demand recording of Enter Wait
mode.
– COUNT_RATE:
• « MS2_COUNTRATE_0001_2019-08-22_1.csv » for on-demand recording of count rate.
To Next Page
Loading...
Need help?
General
