Mirion Technologies MiniSentry-2 - Unit System

USE MANUAL
MINISENTRY-2
46 / 170
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
2
Loches Cedex
9.9.6 Unit system
The unit system is applicable for both portal probe and Frisker probe.
1. Press the key to access the main menu.
Note: The « Measure Mode » line is selected by default. If necessary press the or keys to
select the line « Measure settings ».
2. Press the key to display the « Measure settings » screen and select the line « Unit
system » with or key
3. Press the key to display the « Unit system » screen:
To modify a value:
• Select the line with or key,
• Select the value and exit with the key,
Unit system choice
Unit Values available
SI
c/s, Bq and Ci
US
cpm, dpm and Ci
4. Press the key to return to the previous screen,