USER MANUAL
MINISENTRY-2
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S, BP249, ZI de Vauzelles, 37602
1 GENERAL SAFETY INSTRUCTIONS
Read these instructions carefully before using the device and keep them for future reference.
Observe all warning and recommendations marked on the device.
Never try to intervene yourself on the device, such as opening or removing covers that could expose
you to dangerous voltage or other hazards, and that would void the manufacturer's warranty. Refer to
the services of qualified people for the maintenance of the product.
Disconnect this product from all power supplies and refer to qualified personnel for the following cases:
− When the power cable or plug is damaged or cracked,
− If the unit does not operate normally and the operating instructions have been followed. Only
perform the checks that are covered by the operating instructions since improper performance
of other controls may result in damage and will often require additional work by a qualified
technician to restore the unit to its normal operating condition.
− If the device has dropped and its case has been damaged,
− If the device shows a significant change in performance, this indicates the need for qualified
service personnel to repair the device.
2 SAFETY INSTRUCTIONS
: Warning, risk of electric shock.
Indicates the presence of the mains and a risk of electric shock if the protections are removed.
Always disconnect the mains cable completely from the case whenever you use the device.
Only qualified personnel will be able to open the box.
: Caution, the accompanying documents must be consulted.
To Next Page
Loading...