USER MANUAL
MINISENTRY-2
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S., BP249, ZI de Vauzelles, 37602
30.7.4 Installation
1. Add Loctite and tighten the 2 screws using the PZ1 screw driver.
2. Screw the 2 nuts using the 8mm wrench (blue arrows)
3. Connect both wires to the power supply (Red Arrows)
4. Install rear cover § Erreur ! Source du renvoi introuvable.
To Next Page
Loading...
