Mirion Technologies MiniSentry-2 User Manual

USER MANUAL
MINISENTRY-2
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S., BP249, ZI de Vauzelles, 37602
Loches Cedex
129 / 170
: The device must be connected to the electrical mains on a grounded power supply and with a
3-conductor cable of 1 mm
2
.
10. Power up the unit and go to the start-up screen.
27 SPARE PARTS LIST FOR THE INITIAL PERIOD (1-2 YEARS)
Essential
Qty Description Order No.
1 Battery kit
93652
108346
14349
Non-Essential (but could be useful)
Qty Description Order No.
Monitor parts
1 Front panel 107750
1 Labels
107758
107909
107910
107908
1 Dongle board kit 108334
1 Main power supply connector kit 108335
1 Switch On/Off kit 108336
1 Interface board kit 108199
1 Mother board kit 108337
1 Protection glass kit
101826
101827
1 Ready to measure light kit
107878
107987
1 Loud speaker kit 108339
1 Rear cover kit 108340
ON / OFF
Switch
Upon powering up the MiniSentry,
the
above start-up screen will
appear
after a few seconds.

Mirion Technologies MiniSentry-2 Specifications

General

Brand	Mirion Technologies
Model	MiniSentry-2
Category	Monitor
Language	English