USER MANUAL
MINISENTRY-2
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S., BP249, ZI de Vauzelles, 37602
9.11 ADVANCED SETTINGS
: « Advanced settings » are only accessible at the « Administrator » and « Technician »
user level (To change the user level, refer to § 9.12).
9.11.1 Fault alarms
The « Fault Alarms » menu allows the user to set conditions for unexpected operations, including both
low and high count rates, calibration expiration, and AC power loss. These conditions can generate a
warning or take the MiniSentry-2 « Out of Service » until the condition is remedied. This is discussed in
the « Fault Alarms » Menu.
1. Press the key to access the « Main menu ». and press the or keys to select
the line « Advanced settings ».
2. Press the key to display the « Advanced settings » screen
To Next Page
Loading...