USE MANUAL
MINISENTRY-2
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
13.10 COEFFICIENT VALIDATION
1. Click on « Validate coefficient » button to display the following screen:
The calibration file is saved in the following non-modifiable path, located in the application directory:
« C:\...\Application directory\DataFiles\Calibration\Minisentry2\ ».
The file name, unchangeable, as follows:
« CALIB_Minisentry 2_SERIAL NUMBER_YYYYMMDD ».
To Next Page
Loading...