USER MANUAL
MINISENTRY-2
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S., BP249, ZI de Vauzelles, 37602
8 DESCRIPTION
8.1 PEDESTRIAN CONFIGURATION
The base configuration of MiniSentry pedestrian (Figure 1) is equipped with:
• Footplate for each post with mounting hardware (x2),
• Primary detector post with MiniSentry Control unit,
• Top cross piece with attached elbows for pedestrian configuration,
• Secondary detector post,
• Power cable.
Options are:
• 91.5 cm (36 in) top cross piece kit for extended pedestrian configuration,
• Red / green light tower,
• Nylon case and foam pieces needed for future shipping,
• Flight transport case,
• Frisker probe and holder,
• Battery extension.
Figure 1 Pedestrian Configuration
Control unit
Red / green light tower
(Optional)
To Next Page
Loading...