USER MANUAL
MINISENTRY-2
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra)S.A.S., BP249, ZI de Vauzelles, 37602
The automatic recording of the calibration is carried out in the following non-modifiable path, located in
the application directory: « C:\...\Application directory\DataFiles\Param\Minisentry2\ »:
The file name, unchangeable, as follows:
« SAVE_PARAM_Minisentry 2_SERIAL NUMBER_YYYYMMDD ».
Note: If several calibrations for the same probe have been generated on the same day, only the most
recent will be saved.
4. The portal probe is in initializated and in « Probe not calibrated » state, click on « X » button
to quit.
To Next Page
Loading...