Mitsubishi 700 Series

PROTOCOL-SPECIFIC INFORMATION
127
9
Where
[reg] is just the 3-character sequence “reg”.
[register number] is a 1- to 4-character field (“1”, “2”…”507”, “508”, “1000”, “1001”… etc.)
corresponding to the inverter register number.
Examples
“Output voltage” (register #203) ............................................. reg_203
“Frequency command” (register #2) ...................................... reg_2
“Inverter status” (register #100) ............................................. reg_100
“Acceleration time” (Pr. 7 / register #1007) ............................ reg_1007
For explicit messaging examples, refer to sections 9.2.13 and 9.2.14.