PROTOCOL-SPECIFIC INFORMATION
Register
The inverter register (refer to section 4) associated with the word offset. For the Monitor Data object,
enter a “status” register to be monitored. For the Command Data object, enter a “command” register that
can be written.
Network Number
Specifies the network number of the target station. Fixed to 0.
PC/Station Number
Specifies the PC/station number of the target station. Fixed to 0xFF.
Module IO Number
Specifies the module I/O number (also known as the processor number) of the target station. Fixed to
0x3FF.
9.7.6 Diagnostic Objects
Each command and monitor data object can optionally include a diagnostics object for debugging and
diagnostics. Refer to section 5.9.
Diagnostic Index
Enter the diagnostic index at which to store the diagnostics information.
To Next Page
Loading...
