Mitsubishi 700 Series User Manual

PROTOCOL-SPECIFIC INFORMATION
149
9
9.2.12.2 ControlLogix Example: AC/DC Drive Profile Add-On Instruction
The AC/DC drive profile add-on instruction is a simple interface to command and monitor the inverter. It
is based on the assembly instances 21 & 71.
1) Complete all the steps in section 9.2.12. Please note that the Assembly Input Instance must be
changed to 71 and the Assembly Output Instance must be changed to 21. Refer to Figure 50.
Figure 50: AC/DC Drive Profile Generic Ethernet Module Configuration

Mitsubishi 700 Series Specifications

General

Control Method	Vector Control
Overload Capacity	150% of rated current for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication Options	RS-485, Profibus, Ethernet
Output Power Range	0.4 kW to 630 kW
Cooling Method	Forced air cooling (fan) (Varies by model)
Operating Temperature	-10 to +50°C (Varies by model, may be derated at higher temperatures)
Storage Temperature	-20 to +65°C
Humidity	95% RH or less (non-condensing)
Altitude	Up to 1000 m above sea level (Derating may be required above 1000 m)
Enclosure Rating	IP20
Model	FR-A700, FR-F700, FR-E700, FR-D700, FR-S700