2.2 A700 & F700 Installation Procedure
2.2.1 Installation of the Communication Option LED Display Cover
Mount the LED display cover on the inverter front cover.
1) Cut off the tabs on the backside of the inverter
front cover with a nipper, etc. and open the
knockout for the LED display cover.
2) Fit the LED display cover into the knockout
on the front of the inverter front cover and
push it until the tabs lock into place.
To prevent hand injury, avoid contacting the tabs on the backside of the front cover.
Cut off with a nipper, etc.
Cut off with a nipper, etc.
cover so that the lenses are
in the upper-right corner.
To Next Page
Loading...
