Mitsubishi 700 Series

PRE-OPERATION INSTRUCTIONS
25
1
1.5.3 EtherCAT LED Description
Run (LED3)
LED Activity
Slave State
Note
Off
Device Off or
INITIALISATION
The inverter power is off or the device is in state INIT
Green Blink,
Red Blink or
Red Flickering
INITIALISATION
Startup blink sequence; the device is booting and has not
yet entered the INIT state
Green
Blinking
PRE-OPERATIONAL The device is in state PRE-OPERATIONAL
Single Green
Flash
SAFE-OPERATIONAL The device is in state SAFE-OPERATIONAL
Green On OPERATIONAL The device is in state OPERATIONAL
Red Blink
Error Code
Refer to the TROUBLESHOOTING section