Mitsubishi 700 Series

PROTOCOL-SPECIFIC INFORMATION
204
Relinquish Default
Defines the default value to be used for an object’s present value property when all entries in the
object’s priority array are NULL.
9.4.7.9 Multi-state Value Object Settings
Object Name
The name of the BACnet object. Enter a string of between 1 and 32 characters in length. All object
names must be unique within a node.
Instance
The BACnet object’s instance number. Enter a value between 0…4194302 (0x0…0x3FFFFE).
Register
The inverter register number (refer to section 4) that the BACnet object’s present value will access.
Relinquish Default
Defines the default value to be used for an object’s present value property when all entries in the
object’s priority array are NULL.