Mitsubishi 700 Series User Manual

PRE-OPERATION INSTRUCTIONS
2
Supported Protocols
The interface currently provides support for the following fieldbus protocols:
• Modbus/TCP Server
• EtherNet/IP Server (DLR node)
• Allen Bradley CSP Server (also known as “PCCC” and “AB Ethernet”)
• BACnet/IP Server
• Mitsubishi MELSEC / SLMP Server (also known as “MC protocol”)
• CC-Link IE Field Basic Server
• Mitsubishi MELSEC Client
• SLMP Client
• PROFINET IO Device (MRP client)\
• IEC 61850 Server
• EtherCAT Slave

Mitsubishi 700 Series Specifications

General

Control Method	Vector Control
Overload Capacity	150% of rated current for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication Options	RS-485, Profibus, Ethernet
Output Power Range	0.4 kW to 630 kW
Cooling Method	Forced air cooling (fan) (Varies by model)
Operating Temperature	-10 to +50°C (Varies by model, may be derated at higher temperatures)
Storage Temperature	-20 to +65°C
Humidity	95% RH or less (non-condensing)
Altitude	Up to 1000 m above sea level (Derating may be required above 1000 m)
Enclosure Rating	IP20
Model	FR-A700, FR-F700, FR-E700, FR-D700, FR-S700