Mitsubishi 700 Series User Manual

PROTOCOL-SPECIFIC INFORMATION
139
9
Figure 39: AOP AC/DC Drive Profile Module Definition
In the “Connection” portion of the dialog box, enter the following information:
Name: In this example, select AC/DC Drive Profile 21 71.
Size: Because all inverter data is stored as 16-bit function codes, change the data type to “INT
array”.

Mitsubishi 700 Series Specifications

General

Control Method	Vector Control
Overload Capacity	150% of rated current for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication Options	RS-485, Profibus, Ethernet
Output Power Range	0.4 kW to 630 kW
Cooling Method	Forced air cooling (fan) (Varies by model)
Operating Temperature	-10 to +50°C (Varies by model, may be derated at higher temperatures)
Storage Temperature	-20 to +65°C
Humidity	95% RH or less (non-condensing)
Altitude	Up to 1000 m above sea level (Derating may be required above 1000 m)
Enclosure Rating	IP20
Model	FR-A700, FR-F700, FR-E700, FR-D700, FR-S700