Mitsubishi 700 Series User Manual

MITSUBISHI CONFIGURATION STUDIO
72
A parameter is accessible and actively scanned (read from and written to the inverter) only if its
corresponding checkbox is enabled. Likewise, a parameter is inaccessible if its checkbox is disabled.
Parameters that are accessed more frequently or require a faster update rate should be set to high
priority. All other parameters should be set to low priority.
Figure 4: Manage Device Parameters

Mitsubishi 700 Series Specifications

General

Control Method	Vector Control
Overload Capacity	150% of rated current for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication Options	RS-485, Profibus, Ethernet
Output Power Range	0.4 kW to 630 kW
Cooling Method	Forced air cooling (fan) (Varies by model)
Operating Temperature	-10 to +50°C (Varies by model, may be derated at higher temperatures)
Storage Temperature	-20 to +65°C
Humidity	95% RH or less (non-condensing)
Altitude	Up to 1000 m above sea level (Derating may be required above 1000 m)
Enclosure Rating	IP20
Model	FR-A700, FR-F700, FR-E700, FR-D700, FR-S700