1
Basic scanning 1-3
Basic scan functions
4
Press [e-mail].
5
Select the desired destination.
•For details on specifying the destinations, see “Specifying destinations” (page 5-2).
•To use the personal address book, log in to the machine in advance.
•If you have selected a destination from the address book, scanning starts immediately.
6
Press <Start>.
•This step is not necessary when you have selected the destination from the address book.
•When you have loaded the document on the automatic document feeder, this will conclude
the operation.
•When you have loaded the document on the document glass, the following message will
appear when the first page of the document is scanned.
7
Load the next document, and press [Next Doc].
To finish scanning, press [Complete].
8
Repeat step 7 to scan all the documents.
To finish scanning, press [Complete].
To Next Page
Loading...
