7-18 Registering destinations
5
Press [Shortcut Name].
If you do not want to register or edit the shortcut name, proceed to step 7.
6
Register or edit the shortcut name, and press [Enter].
For details on entering characters, see chapter 1, “Entering characters” in the Administrator’s
Guide.
7
Press [Link].
If you do not want to change the link, proceed to step 9.
8
Enter or edit the link to the FTP server you want to register, and press [Enter].
Start the link with two slashes (“//”).
9
Press [User Name].
10
Enter or edit the user name, and press [Enter].
For details on entering characters, see chapter 1, “Entering characters” in the Administrator’s
Guide.
11
Press [Password].
12
Enter or edit the password, and press [Enter].
For details on entering characters, see chapter 1, “Entering characters” in the Administrator’s
Guide.
13
Press [Enter].
To continue to register or edit shortcuts, repeat the procedure from step 4.