3 Before using VJ-1624 OPERATION MANUAL
3-12
• When all cleaning cartridges are installed, "Busy-Washing" is displayed on the operation panel,
and the printer starts charging the cleaning fluid.
• When the cleaning fluid has been charged, "Remove Cartridges" is displayed on the operation
panel.
5. Remove all the cleaning cartridges.
• "Busy-Washing" is displayed on the operation panel and the printer starts head cleaning.
• When head cleaning is complete, "Wash retry? No" is displayed on the operation panel.
6. Press the [Enter] key on the operation panel.
• "Insert InkCartridges" is displayed on the operation panel.
7. Take out the ink cartridge from the bag and shake it gently two to three times and insert it into the
printer.
• Keep mark of the ink cartridge facing up and insert towards the printer side.
No. Name
1 Cleaning cartridge
2 Ink cartridge slots
No. Name
1 Cleaning cartridge
1
To Next Page
Loading...
