Configuring Your Server 4-41
To initialize hard disk drives:
1. Start the ACU.
See "Running the Array Configuration Utility (ACU)" described earlier.
2. From the Options menu, select [Array Configuration Utility] and press Enter.
3. Select [Configure Drives] from the main menu and press Enter.
4. Use the cursor keys to select the hard disk drive you wish to initialize and press Insert.
5. Repeat Step 4 so that both drives to be initialized are selected.
6. Press Enter.
7. Read the warning message and ensure that you have selected the correct disk drives to initialize. Type Y to
continue.
To Next Page
Loading...
