Installing the Operating System with Express Setup 5-33
IMPORTANT:
îš„ You can not go to the next screen if the specification is incorrect.
îš„ On specification, an error may occur in relationship with the specified contents of the former screen
and require to go back to modify the specification.
îš„ During the setup, the screen to specify the partition that Windows 2000 is to be installed appears.
The first 55MB area displayed on the screen is a partition that is used to store the configuration
information or utilities unique of the server. We do not recommend to delete this area, but if you do
not want to reserve this 55MB area, perform the installation by manual setup. It is unable to delete
this area by Express Setup.
NOTES:
îš„ If you click [Cancel] in [Basic Information] screen, the screen will go back to select the OS.
[Cancel] exists only in [Basic Information] screen.
îš„ If you click [OK] in [Role of Computer] screen, the setup automatically selects default value for the
later specification to continue the installation.
13. Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk attached to mass storage driver
into the floppy disk drive and follow the message to operate the installation.
NOTE: You can use this function only when the floppy disk drive is attached to the
system.
14. Remove the EXPRESSBUILDER CD-ROM from the CD-ROM drive according to the message.
If you proceed the setup by using setup parameter file, remove the floppy disk from the floppy disk drive.
Insert Windows Server 2003 CD-ROM into the CD-ROM drive.
[Agree Software License Agreement] screen appears.
To Next Page
Loading...
Need help?
General
