4-12 Configuring Your Server
Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced."
If you select a menu item preceded by symbol
Æ and press Enter, the appropriate submenu appears.
See the table below for the items.
Option Parameter Description Your Setting
Boot-time
Diagnostic Screen
Disabled
[Enabled]
Specifies whether the self-test (POST)
running screen is displayed or not on
booting. If disabled, the BIOS will display a
full-screen logo during POST. Press Esc to
switch to the POST execution screen.
Reset
Configuration Data
[No]
Yes
Selects "Yes" if you want to clear the system
configuration data during the next boot.
Automatically reset to "No" in the next boot.
NumLock [On]
Off
Sets power on Numlock state.
Memory/Processor
Error
[Boot]
Halt
If "Halt" is selected, the boot is stopped
when POST error occurs.
Multiprocessor
Specification
1.1
[1.4]
Defines Multiprocessor Specification (MPS)
version.
[ ]: Factory-set
To Next Page
Loading...
