Configuring Your Server 4-13
Memory Configuration
The following screen appears if you select "Memory Configuration" on the Advanced menu.
See the table below for the items.
Option Parameter Description Your Setting
Installed
memory
–
Indicates the total capacity of the
basic memory. (View only)
Available to OS –
Indicates the total capacity of the
memory available for OS. (View
only)
Used by devices –
Indicates the total capacity of the
basic memory used by each device.
(View only)
DIMM Group
#1 - #4 Status
Installed (ex. 256MB)
Not installed
Disabled
Indicates the current memory status.
(View only)
"Installed (ex. 256MB)" indicates
that the memory devices operate
normally.
"Not Installed" indicates that no
memory devices are installed.
"Disabled" indicates that one or
more memory devices are defected.
Memory Retest [No]
Yes
Causes BIOS to retest all memory
on the next boot.
Extended RAM
Step
1MB
[Disabled]
"1MB" indicates that the memory
test is done in the unit of 1MB.
"Disabled" indicates that only
memory initialization is done.
[ ]: Factory-set
To Next Page
Loading...
