4-14 Configuring Your Server
PCI Configuration
The following screen appears if you select "PCI Configuration" on the Advanced menu. Selecting an item on the screen
allows the proper submenu to appear.
See the table below for the items.
Option Parameter Description Your Setting
PCI Slot 1 - 5
Option ROM
[Enabled]
Disabled
Enables option ROM scan of the
selected device.
When the graphics accelerator board
is installed or the disk array controller
or SCSI controller boards to be
installed are connected to the hard
disk drive in which OS is installed, set
this item to "Enabled." When the LAN
controller board with installation of the
option ROM BIOS is used but the
board does not provide network
booting, set this item to "Disabled."
Disabling Option ROM Scan saves
memory consumption and time for
startup.
[ ]: Factory-set
– Embedded NIC submenu
See the table below for the items.
Option Parameter Description Your Setting
Onboard LAN
Control
Disabled
[Enabled]
Specifies whether the onboard network
controller is enabled or disabled.
LAN1 Option ROM
Scan
Disabled
[Enabled]
Displays the submenu for Option ROM of
onboard LAN controller.
[ ]: Factory-set
To Next Page
Loading...
