4-26 Configuring Your Server
Exit
The Exit menu appears if you move the cursor to "Exit."
The options on the menu are described below.
Exit Saving Changes
Select this item to terminate SETUP after saving the newly selected information in CMOS (nonvolatile memory).
Selecting "Exit Saving Changes" causes the confirmation screen to appear. If you select "Yes," SETUP is terminated
with the newly selected information saved in CMOS (nonvolatile memory). Then the server automatically reboots the
system.
Exit Discarding Changes
Select this item to terminate SETUP without saving the newly selected information in CMOS (nonvolatile memory).
Selecting "No" allows SETUP to be terminated without storage of the modified information. Then the server
automatically reboots the system. Selecting "Yes" allows SETUP to be terminated with storage of the modified
information. Then the server automatically reboots the system.
Load Setup Defaults
Select this item to return all the values of SETUP to the default values. Selecting "Load Setup
Defaults" causes the confirmation screen to appear. Select "Yes" to return the values to the default values. Select "No"
to return to the Exit menu screen.
To Next Page
Loading...
Need help?
General
