To Next Page

To Previous Page

Page | 218

ROT (ROTATE)

 Move the joystick horizontally (as viewed from above) to rotate delegated sources on the Y axis.

 Move the joystick vertically to rotate delegated sources on the X axis.

 Twist the joystick clockwise/counter-clockwise to rotate delegated sources on the Z axis.

CROP

 Twist the joystick clockwise (as viewed from above) to crop delegated sources inward on all four

edges, maintaining the original aspect ratio.

 Twist the joystick counter-clockwise to reduce cropping of delegated sources on all 4 edges.

 Move the joystick horizontally to crop only the left edge of delegated sources.

 Move the joystick horizontally with the joystick button pressed to crop only the right edge of delegated

sources.

 Move the joystick vertically to crop only the top edge of delegated sources.

 Move the joystick vertically with the joystick button pressed to crop only the bottom edge of delegated

sources.

RESET

Despite its location, RESET is really an action button (not a Joystick mode). Press it to restore all position

settings for currently delegated source(s) to their defaults. (This is also why RESET does not stay selected

when pressed, nor does it change the current Joystick mode.

The two special delegate selections also work differently with RESET:

 When VIRTUAL ZOOM is delegated, the LiveSet preset for delegated M/Es) is reset to the #1 preset.

 When SHUTTLE is delegated, selected Media Players are reset to the starting point of the current item

(or playlist).

MONITORING

While using the joystick in most POSITIONER DELEGATE modes, many adjustments are temporarily shown

on the Live Desktop’s Preview monitor. The Preview monitor reverts to its default display a few moments

after releasing the joystick to its at-rest position, just as occurs when using Positioner tools on the Live

Desktop.

21.3.6 MANAGING COMPS

Comps are one of the most exciting features of TriCaster Advanced Edition, and your control surface makes

it easy to apply and manage them. The 16 Comps available for the main Switcher or each individual M/E are

associated with the first sixteen buttons on the DSK/ KEY rows of your 8000 CS.

NewTek tricaster advanced edition User Manual

Questions and Answers: