Page | 249
21.6.8 RECORD TOGGLE
It’s probably no surprise at all that pressing the REC (Record) button enables TriCaster’s own Record feature.
It’s worth mentioning though, that REC is not a simple toggle button (as it is on the user interface). Simply
pressing REC again does not turn Record off.
Recording is such an important function, we are sure you agree you don’t want anyone
to be able to accidentally disable it.
For this reason, you must use ALT + REC (hold down ALT while pushing REC) to turn recording off. This
makes disabling recording a very deliberate operation, and not one that is at all likely to have been
unintentional (as perhaps by some hapless passerby coming in contact with the control surface while looking
over your shoulder).
TW-42 NOTES There is no REC button on TW-42. Even so, pushing the Replay In button will automatically enable
Record.
Also, you can add a five second clip from the Primary record source to all current Add to targets
by pressing SHIFT + REC.
21.6.9 DDR OPTIONS
The LOOP, SINGLE and AUTOPLAY buttons toggle their namesake features for the
currently delegated DDR.
TW-42 NOTES There is no Loop or Autoplay button on TW-42. While there is no Single button either, TW-42’s Sel
(Select) and List buttons turn Single mode on and off for the current DDR.
21.6.10 PRESET (DDR PLAYLIST)
“P” is for “preset” … or “playlist”, if you prefer. However you choose to view
it, the buttons labeled P1 – P4 allow you to quickly access any of the first four
playlist presets for the currently selected DDR.
To Next Page
Loading...
Need help?
General