Page | 21
FIGURE 3-4 – TRICASTER MINI
Note: Hardware details as depicted are subject to change without prior notice.
If your equipment supports SDI, this is the best quality option.
1. Connect sources to suitable connectors in the VIDEO IN section: SDI, HDMI (TriCaster Mini only),
Component, Y/C (S-Video), or Composite (may require RCA> BNC adapter).
a. SDI – Attach SDI source connectors to one of the BNC connectors in the Video In group marked SDI.
b. HDMI (TriCaster Mini only) – Connect your HDMI source cables to HDMI inputs on the front of the
unit.
Note: The analog video input connection options listed next are not provided by TriCaster 410 or Tricaster
Mini.
c. Component – Attach the appropriate BNC connectors from your sources to all three analog
BNC connectors (labeled Y, Pb and Pr) in a column of the Video In group.
To Next Page
Loading...
Need help?
General