Page | 39
Generally, simply connecting a suitable cable from the Ethernet port on TriCaster’s backplate to your local
network is all that is required to add TriCaster to a local area network (LAN). In some settings, additional
steps may be required. You can access the system Network and Sharing control panel to accomplish more
extensive configuration tasks – see Settings: Configure Network under the heading Administrator Mode in
Section 5.2.3. If further help connecting is required, please consult your system administrator.
The next section (Chapter 4, Basic Training) will introduce you to online tutorials, training materials and
other assets to guide you through your experience using TriCaster.
To Next Page
Loading...
Need help?
General