NSK EDD Megatorque Motor - Page 104

5. Tuning
— 5-12 —
6) Enter the ENT key to complete the tuning and the changed parameter data will be displayed.
(An input of the BS key reset to the setting before the tuning.)
:>SG/AJ
STEP 1
SG 13
PG0.26;_
ENT
Each setting is indicated with the prompt “; (colon)”, and the screen pauses the indication at this
stage.
7) Input the SP key.
(An input of the BS key will abort the readout.)
SG 13
PG0.26;
VG2.81;
:>_
SP
SP