NSK EDD Megatorque Motor - Cancelling Command; Input of the Password

8. More Advanced Function
— 8-58 —
8.9.2.3. Cancelling Command
 An input of a backspace code Backspace (08
H
) cancels a character of the command that has been entered
halfway.
 For an example, when the backspace code (08H) is input following a character string of “VG0.5,” the
cursor moves one space back to the position where 5 was input and thereby deletes it.
:VG0._
:VG0.5_
→ BS input →
（08H）
Input (to Driver Unit)
08H
5
.
0
G
V
Echo back (form Driver Unit)
20H
08H
08H
5
.
0
G
V
8.9.2.4. Input of the Password
 Some special commands require password entry for preventing erroneous entries.
 Input the password as /NSK ON + Carriage return (0D
H
).
 The Driver Unit returns“NSK ON”for the acknowledgment.
 A command that requires the password can be executed immediately after an entry of the password.
:/NSK ON
NSK ON
:_
Entered password
Acknowledgement
Input (to Driver Unit)
N
O
0DH
20H
K
S
N
/
Acknowledgement (from Driver Unit)
Waits for the next command.
N
O
0AH
0DH
20H
K
S
N
/
N
O
0AH
0DH
20H
K
S
N
(1)
(2)
(1)
20H
(2)
: