NSK EDD Megatorque Motor - PX Series

2. Specifications
— 2-21 —
2.6.1.3. PX Series
Fig 2-27: PX3050 type Motor
12-M5 × 0.8 depth 9
PCD94 (30° equal pitch)
Cover
Non-Rotation
Part
Waste
Heat Hole
Rotor
Rotation Part
Material:
Aluminum
Surface
Treatment: N/A
7.5 or more
(width of ø105 h8)
Nameplate
Fixed Surface B
10 or more
Fixed Surface A
Resolver Connector
Motor Connector
6-M5 × 0.8 depth 8
PCD151 (60° equal pitch)
6-M6 × 1.0 depth 9
PCD69 (60° equal pitch)
Waste
Heat Hole
Fixed Surface B
Material: Iron
Surface Treatment: Electroless
Nickel Plating
Fixed Surface A
Material: Iron
Surface Treatment: Electroless Nickel Plating
depth 9
(C0.5)
Caution : The bend radius of the motor cable lead (ø 7) and the resolver cable lead
(ø 7) should be R30 [mm] or more.
Caution : Do not use the leads of the motor cable and the resolver cable with
flexing motion.
Caution : Do not add the stress (tension, vibration, etc) to the joint of the leads and
the connector. It causes the disconnection and the loose connection.
！
！
！