NSK EDD Megatorque Motor - Inputting a Command While

4. RS-232C Communication and USB Communication
— 4-15 —
4.2.5.1. Inputting a Command while Monitoring Multiple Conditions
 The following example describes how to monitor simultaneously the monitor TP (Monitor current position
in units of pulse) and the monitor TV (Monitor current velocity). The function to monitor multiple
conditions simultaneously is called “Multi-monitor.”
1) Input the monitor TP to the multi-monitor.
Input as Monitor code + /WW.
2) And subsequently input the monitor TV.
Thus, two conditions can be monitored simultaneously. You may input the command in this
state.